Search results for 'Impact sport ear Muff1111111111111' UNION SELECT C'

Aluminum checker plate. Aluminium Tread Plate 2.5mm 1200mmx1200 mm The flat part of the aluminum plate is about 2 mm, and the patterned part is about 2.8 mm Widely used in construction (flooring) Platform design and other aspects. Since the pattern on the surface of the Aluminum checker plate is arranged in a relatively parallel manner according to the five concave and convex patterns, the Aluminum checker plate is usually used as a non-slip and has a good anti-slip effect.

As the Aluminium checker plate is big size, Home delivery will charge expensive delivery fee and can not estimate how much will happen, We just deliver to the courier depot or your commercial address, Thanks

Depot pick up only available at metro city nearest TGE(Toll) depot

The tge depot address is https://kiwisafety.co.nz/blog/TGE/

Learn More

New Zealand largest roof box at 730 litres, purpose-built for full size and luxury SUVs including Land Cruiser, Land Defender, Mercedes Benz GLS 350, Hyundai Palisade, Mitsubishi Outlander, Ssangyong Rexton, and Nissan Elgrand.

At 2300mm long and 920mm wide, this large roof box gives your family the extra storage needed for camping gear, ski equipment, snowboards, baby strollers, or oversized luggage, without cramping the cabin.

Key features:
- 730L capacity, NZ's largest available roof box
- Fits roof rack spans of 65.5cm to 94.5cm (adjustable in 2.25cm steps)
- No need to reposition your existing roof rack in most cases
- Double-sided opening for easy access from either side
- Anti-theft lock included
- Cushion damping folding support rod for smooth opening
- Aerodynamic ABS+ASA composite shell reduces wind noise
- Waterproof seal for all-weather use
- Weight: 25kg, External: L2300 x W920 x H410mm

As the box is big volume, Home delivery will charge expensive delivery fee and can not estimate how much will happen, We just deliver to the courier depot or your commercial address, Thanks

Depot pick up only available at metro city nearest TGE(Toll) depot

The TGE depot address is https://kiwisafety.co.nz/blog/TGE/

Roof Box Safety instructions

1. When the car is running, make sure that the roof box is completely closed and locked.

2. Before installing the roof box, be sure to check whether the roof rack is firm,

3. When placing the roof box, please adjust it to the proper position to ensure that the roof rack can bear the weight of the roof box evenly and ensure that the installation and fastening mechanism are always in a tight state.

4. The installation position of the roof box shall not exceed the overlooking range of the car body, can not affect the sight of the driver, and can not interfere with other parts or accessories of the car.

5. Empty the roof box when loading and unloading.

6. The load of the goods shall not exceed the rated load, and please confirm the approved load of the roof rack.

7. Items in the roof box must be evenly placed and fixed with a rope.

8. The center axis of the roof box should be aligned with the center axis of the car.

9. The speed of the car shall not exceed 120 km/h.

10.Avoid height restrictions or garage doors when entering garages and parking lots ，Some customer demage the cover in this way

 

Q: Will this fit my Land Cruiser / Land Defender?
A: Yes — we have installed this box on both Land Cruiser and Land Defender
with great results. See customer photos above.

Q: Do I need to move my roof racks to install this?
A: In most cases no. The bottom hole design accommodates most standard
roof rack positions (65.5cm–94.5cm span).

Q: What is the maximum speed with the roof box fitted?
A: Do not exceed 120 km/h with the roof box installed.

Q: How do I receive this item — can it be home delivered?
A: Due to the large size, we deliver to your nearest TGE (Toll) depot
or commercial address. Depot pickup is also available in Auckland.

Learn More

The Toyota Estima is a popular vehicle in New Zealand, known for its sliding doors. We install roof racks using a clamp model, with one bar placed at the front door and the other at the rear window. Each rack comes with specially designed hooks to fit the unique curves of the car. Learn More

Polyethylene core sandwiched one side thin aluminum panels. size 1.22 meter X2.44 meter

Size 1.22 meter X2.44 meter

Thickness 4mm

Aluminum Panel Thickness 0.08 mm

Color Red

As the Aluminum Composite Panel is big size, Home delivery will charge expensive delivery fee and can not estimate how much will happen, We just deliver to the courier depot or your commercial address, Thanks

Depot pick up only available at metro city nearest TGE(Toll) depot

The tge depot address is https://kiwisafety.co.nz/blog/TGE/

Learn More

Polyethylene core sandwiched one side thin aluminium panels. size 1.22 meter X2.44 meter

Size 1.22 meter X2.44 meter

Thickness 4mm

Aluminium Panel Thickness 0.08 mm

Can be cutted by knife

Color Orange Red

As the Aluminum Composite Panel is big size, Home delivery will charge expensive delivery fee and can not estimate how much will happen, We just deliver to the courier depot or your commercial address, Thanks

Depot pick up only available at metro city nearest TGE(Toll) depot

The tge depot address is https://kiwisafety.co.nz/blog/TGE/

Learn More

Strong, lightweight aluminum composite material with a sleek black finish. Perfect for cladding, signage, and decorative projects in Auckland and across New Zealand

Polyethylene core sandwiched two side thin aluminum panels. size 1.22 meter X2.44 meter

Size 1.22 meter X2.44 meter

Thickness 4mm

Aluminum Panel Thickness 0.08 mm

Can be cutted by knife

Color Black

As the Aluminum Composite Panel is big size, Home delivery will charge expensive delivery fee and can not estimate how much will happen, We just deliver to the courier depot or your commercial address, Thanks

Depot pick up only available at metro city nearest TGE(Toll) depot

The tge depot address is https://kiwisafety.co.nz/blog/TGE/

Learn More

Polyethylene core sandwiched two side thin aluminum panels. size 1.22 meter X2.44 meter

Size 1.22 meter X2.44 meter

Thickness 4mm

Aluminum Panel Thickness 0.08 mm

Weight about 18kg

Can be cutted by a knife

Color Grey

As the Aluminum Composite Panel is big size, Home delivery will charge expensive delivery fee and can not estimate how much will happen, We just deliver to the courier depot or your commercial address, Thanks

Depot pick up only available at metro city nearest TGE(Toll) depot

The tge depot address is https://kiwisafety.co.nz/blog/TGE/

Learn More

Premium roller shutter cover custom-fit for BYD Shark ute. Durable aluminium construction, retractable design with central locking system. Weatherproof and compatible with roof racks & sports bars. Only 4 left in stock — order now! Learn More

The ACM aluminium joiner is designed for securely connecting two aluminium composite panels (ACP/ACM) with a neat, professional finish. Made from high-quality aluminium, it provides durability, corrosion resistance, and long-lasting strength for both indoor and outdoor applications. Ideal for signage, cladding, displays, and architectural projects, this joiner ensures panels are aligned and supported while maintaining a sleek appearance. Easy to install and lightweight, it offers a practical solution for seamless panel joining. Looking for ACM panel joiners in NZ? Our aluminium joiners are compatible with standard ACM/ACP cladding panels and are available in four profiles to suit any installation: - H-Joiner: Connects two panels side by side for a clean flush finish - Finishing End: Provides a neat edge termination at panel ends or borders - Inside Corner: Used where two panels meet at an internal 90° angle - Outside Corner: Designed for external 90° corners for a professional finish Each joiner is 3 metres long, made from anodised aluminium, and suitable for both indoor and outdoor applications including signage, shopfronts, and architectural cladding projects across New Zealand. Q: What thickness ACM panels do these joiners suit? A: Our joiners are designed for standard 3mm and 4mm ACM/ACP panels. Q: Can the joiners be cut to length? A: Yes, aluminium joiners can be easily cut with a fine-tooth saw or angle grinder to your required length. Q: Are other colours available? A: Currently available in Matt White and Matt black. Contact us for other colour options. Q: Are these suitable for outdoor use? A: Yes, made from corrosion-resistant aluminium suitable for NZ outdoor conditions. Learn More