Search results for 'Roof rack for toyota vellfire'

Car Door Pedal (Roof Box Accessories) Safety Hammer, Pick up something from Roof Box on the car roof Condition: Brand New Material: Aluminium alloy Color: Black *Product Size: Approx. 147x76x77mm Net Weight: Approx. 286g maximum load is 250 kg Learn More

13cm roof tent, original design, no need to worry about not being able to go to the basement, no need to worry about not being able to pass the height limit, low wind resistance and noise. If it is thin enough, the center of gravity of the car will be better, and of course it is light enough and safer. 2. For riders who cross-country through mountains and forests, it is more crash resistant than plastic shells, so you don't have to worry about breaking the shells. 3. For an urban SUV, it is thin, not too prominent, and more harmonious. 4. For a small car or a two-box car, it is thin, light, and small in size, so there is no need to carry a big hat. The size and appearance of the tent shell have been changed. The closed outer dimensions of the tent are: 1.48 meters long and 1.18 meters wide. The advantage is that the tent will be collected about 15 seconds faster than before. The appearance changes to a wind guide design,

Learn More

The ACM aluminium joiner is designed for securely connecting two aluminium composite panels (ACP/ACM) with a neat, professional finish. Made from high-quality aluminium, it provides durability, corrosion resistance, and long-lasting strength for both indoor and outdoor applications. Ideal for signage, cladding, displays, and architectural projects, this joiner ensures panels are aligned and supported while maintaining a sleek appearance. Easy to install and lightweight, it offers a practical solution for seamless panel joining. Looking for ACM panel joiners in NZ? Our aluminium joiners are compatible with standard ACM/ACP cladding panels and are available in four profiles to suit any installation: - H-Joiner: Connects two panels side by side for a clean flush finish - Finishing End: Provides a neat edge termination at panel ends or borders - Inside Corner: Used where two panels meet at an internal 90° angle - Outside Corner: Designed for external 90° corners for a professional finish Each joiner is 3 metres long, made from anodised aluminium, and suitable for both indoor and outdoor applications including signage, shopfronts, and architectural cladding projects across New Zealand. Q: What thickness ACM panels do these joiners suit? A: Our joiners are designed for standard 3mm and 4mm ACM/ACP panels. Q: Can the joiners be cut to length? A: Yes, aluminium joiners can be easily cut with a fine-tooth saw or angle grinder to your required length. Q: Are other colours available? A: Currently available in Matt White and Matt black. Contact us for other colour options. Q: Are these suitable for outdoor use? A: Yes, made from corrosion-resistant aluminium suitable for NZ outdoor conditions. Learn More

Polyethylene core sandwiched two side thin aluminum panels. size 1.22 meter X2.44 meter

Size 1.22 meter X2.44 meter

Thickness 4mm

Aluminum Panel Thickness 0.08 mm

Weight about 18kg

Can be cutted by a knife

Color Grey

As the Aluminum Composite Panel is big size, Home delivery will charge expensive delivery fee and can not estimate how much will happen, We just deliver to the courier depot or your commercial address, Thanks

Depot pick up only available at metro city nearest TGE(Toll) depot

The tge depot address is https://kiwisafety.co.nz/blog/TGE/

Learn More

Strong, lightweight aluminum composite material with a sleek black finish. Perfect for cladding, signage, and decorative projects in Auckland and across New Zealand

Polyethylene core sandwiched two side thin aluminum panels. size 1.22 meter X2.44 meter

Size 1.22 meter X2.44 meter

Thickness 4mm

Aluminum Panel Thickness 0.08 mm

Can be cutted by knife

Color Black

As the Aluminum Composite Panel is big size, Home delivery will charge expensive delivery fee and can not estimate how much will happen, We just deliver to the courier depot or your commercial address, Thanks

Depot pick up only available at metro city nearest TGE(Toll) depot

The tge depot address is https://kiwisafety.co.nz/blog/TGE/

Learn More

Polyethylene core sandwiched one side thin aluminium panels. size 1.22 meter X2.44 meter

Size 1.22 meter X2.44 meter

Thickness 4mm

Aluminium Panel Thickness 0.08 mm

Can be cutted by knife

Color Orange Red

As the Aluminum Composite Panel is big size, Home delivery will charge expensive delivery fee and can not estimate how much will happen, We just deliver to the courier depot or your commercial address, Thanks

Depot pick up only available at metro city nearest TGE(Toll) depot

The tge depot address is https://kiwisafety.co.nz/blog/TGE/

Learn More

Polyethylene core sandwiched one side thin aluminum panels. size 1.22 meter X2.44 meter

Size 1.22 meter X2.44 meter

Thickness 4mm

Aluminum Panel Thickness 0.08 mm

Color Red

As the Aluminum Composite Panel is big size, Home delivery will charge expensive delivery fee and can not estimate how much will happen, We just deliver to the courier depot or your commercial address, Thanks

Depot pick up only available at metro city nearest TGE(Toll) depot

The tge depot address is https://kiwisafety.co.nz/blog/TGE/

Learn More

Aluminum checker plate. Aluminium Tread Plate 2.5mm 1200mmx1200 mm The flat part of the aluminum plate is about 2 mm, and the patterned part is about 2.8 mm Widely used in construction (flooring) Platform design and other aspects. Since the pattern on the surface of the Aluminum checker plate is arranged in a relatively parallel manner according to the five concave and convex patterns, the Aluminum checker plate is usually used as a non-slip and has a good anti-slip effect.

As the Aluminium checker plate is big size, Home delivery will charge expensive delivery fee and can not estimate how much will happen, We just deliver to the courier depot or your commercial address, Thanks

Depot pick up only available at metro city nearest TGE(Toll) depot

The tge depot address is https://kiwisafety.co.nz/blog/TGE/

Learn More

Aluminum CHECKER PLATE 1.00 meters 1.00 Meter The thickness of Plate 2.5 mm The flat part of the aluminum plate is about 2 mm, and the patterned part is about 2.8 mm Widely used in construction (flooring) Platform design and other aspects. Since the pattern on the surface of the Aluminum checker plate is arranged in a relatively parallel manner according to the five concave and convex patterns, the Aluminum checker plate is usually used as a non-slip and has a good anti-slip effect. Learn More